Deep Groove Ball Bearings FAG 6006 -RSR

The FAG 6006-RSR deep-groove ball bearing combines compact dimensions of 30 × 55 × 13 mm with one-sided protection against dirt and reduced friction.

The single-row deep groove ball bearing 6006 -RSR from FAG Rolling Bearings primarily accommodates radial forces as well as axial loads in both directions. Manufactured from standard rolling-bearing steel 100Cr6, this rolling bearing has a bore of 30 mm, an outside diameter of 55 mm and a width of 13 mm. The design, featuring a sheet steel cage and standard radial clearance, ensures smooth running under normal operating conditions. The open rear allows the lubrication requirements to be flexibly adapted to the surrounding assembly.

In which installation situations does the 6006-RSR deep groove ball bearing prove its worth?

Design engineers and maintenance personnel use this design in bearing arrangements where one side of the bearing location is already protected by a housing or a lubrication zone. The single-sided sealing lip keeps particles and splash water away from the exposed side. At the same time, the unsealed side allows lubricant exchange with the surrounding environment. This design is particularly suitable for shaft bearings that combine single-sided protection with unrestricted access to lubricant.

What are the key features of the single-sided RSR seal?

The sliding RSR seal contacts one side of the bearing and retains particles and moisture. As the sealing lip slides on one side only, the design generates less friction than variants sealed on both sides. The permissible temperature range for this design is from -30 to +100 degrees Celsius. Thanks to its tolerance class P0/PN (ABEC 1) and the cylindrical outer ring without a flange or groove, the 30x55x13 deep-groove ball bearing is suitable for standardised bearing seats in mechanical engineering.