SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 2,66 € | 50,57 € |
| 30 | 5,32 € | 47,91 € |
The SKF 6313 /C3 deep groove ball bearing is an open, single-row rolling bearing measuring 65x140x33 mm with increased radial clearance for demanding operating temperatures.
The SKF 6313 /C3 deep groove ball bearing is a versatile radial rolling bearing made from standard 100Cr6 bearing steel. Thanks to its open design without integrated seals, the bearing is particularly suitable for applications where external lubrication or an oil bath is provided. With key dimensions of a 65 mm bore, 140 mm outside diameter and 33 mm width, this design can accommodate high radial loads as well as moderate axial loads in both directions. A robust sheet steel cage guides the rolling elements evenly during operation.
This deep-groove ball bearing is typically used in industrial gearbox designs, drive systems and general mechanical engineering applications. The design covers a temperature range from –20 to +150 degrees. As the bearing is of an open design, lubricating oil or grease circulates freely inside the housing, which facilitates high operating speeds. Designers use this variant wherever the housing already has its own sealing elements, such as shaft seals.
The designation C3 indicates a slightly increased radial clearance compared with the standard version. The internal radial clearance between the balls and raceways is greater when the bearing is unmounted. This compensates for thermal expansion when the inner and outer rings reach different temperatures during operation or when tight fits reduce the bearing clearance. Maintenance engineers and purchasers can thus ensure smooth running under thermal stress, whilst the tolerance class P0/PN or ABEC 1 defines a standardised manufacturing precision.
The bearing has an inside diameter of 65 mm, an outside diameter of 140 mm and a total width of 33 mm. The outer ring is cylindrical, with no groove or flange. Thanks to the standard tolerance class P0 or ABEC 1, the component can be fitted precisely into matching bearing seats on shafts and in housing bores.
The designation C3 indicates a radial operating clearance that is greater than the standard bearing clearance. This design reduces the risk of the rolling elements becoming jammed if the shaft or housing heats up during operation or if tight fits cause the inner ring to expand. It ensures operational reliability under elevated thermal conditions and at varying speeds.
As there are no integrated cover plates or sealing washers, the lubricant from the outside reaches the raceways and balls directly. You can use the bearing in oil-lubricated systems such as gearboxes or fill it manually with grease. It is important to have an external housing seal to prevent the ingress of dirt and the loss of lubricant.
The roller bearing is designed for use at ambient temperatures ranging from -20 to +150 degrees. Within this range, the rings, balls and cage retain their mechanical strength and dimensional stability. When designing the bearing arrangement, the selected lubricant must also be suitable for the relevant operating temperature range.
Within the bearing, a robust sheet-steel cage guides the balls at regular intervals along the raceway. This cage design is resistant to common mineral oil and synthetic lubricants. Thanks to its low weight and open design, friction losses during operation are minimal, which enhances the efficiency of the shaft supported by the bearing.
Both the solid rings and the balls are made from standard roller bearing steel (100Cr6). This case-hardened chrome steel is characterised by high compressive strength, wear resistance and dimensional stability under load. The material is suitable for demanding applications in general mechanical engineering and in industrial drive systems.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership