Deep Groove Ball Bearings FAG 16024

The FAG 16024 deep-groove ball bearing, measuring 120 × 180 × 19 mm, offers a space-saving bearing solution for predominantly radial loads in compact housings.

The 16024 deep-groove ball bearing is a single-row, unshielded rolling bearing that withstands radial and axial forces. Due to the narrow cross-section of this design, the bearing is particularly suitable for applications where there is limited radial installation space despite a large shaft diameter. FAG manufactures the inner and outer rings, as well as the rolling elements, from 100Cr6 rolling-bearing steel, which ensures high dimensional stability during continuous industrial operation.

In which applications is the 16024 deep-groove ball bearing used?

This ball bearing is used where shafts with a diameter of 120 mm need to be guided reliably without unnecessarily increasing the external dimensions of the machine. Typical applications can be found in general mechanical engineering, in gearboxes or in drive systems with oil or centralised lubrication. As the bearing is open at both ends, the lubricant reaches the raceways unhindered, allowing heat to be dissipated rapidly during operation.

What are the key considerations for the open design?

This design does not feature integrated cover plates or sealing discs. Operation requires a clean installation environment, with the bearing housing providing external protection against dirt and moisture. The built-in sheet steel cage guides the rolling elements with minimal vibration and covers a permissible temperature range of -20 to +150 degrees. With the standard tolerance class P0/PN (equivalent to ABEC 1) and normal radial bearing clearance, the component can be easily integrated into standard fits.