Deep Groove Ball Bearings FAG 16014

The 16014 deep-groove ball bearing from FAG Wälzlager, with dimensions of 70 × 110 × 13 mm, offers a narrow design for radial loads in space-constrained applications.

The 16014 deep-groove ball bearing is a single-row rolling bearing made from standard bearing steel (100Cr6). The component features a sheet steel cage and is designed for a temperature range of -20 to +150 degrees. Thanks to the flangeless cylindrical outer ring, the unit can be fitted directly into standardised housing bores. Designed as an open bearing, this version is particularly suitable for units with centralised circulating lubrication or a separate sealing concept.

What is the FAG 16014 deep groove ball bearing suitable for?

This rolling bearing primarily absorbs radial forces, but also supports shafts under light axial loads in both directions. The extremely narrow width of just 13 mm with a shaft diameter of 70 mm makes the bearing ideal for applications with limited axial installation space. Typical applications are found in general mechanical engineering in designs where an external seal is fitted and lubricating oil flows directly around the bearing.

What are the advantages of the open design with standard clearance?

The open design allows for unimpeded lubricant exchange, but requires protection against the ingress of dirt in the housing environment. With standard radial bearing clearance and tolerance class P0 (ABEC 1), the model complies with the current industry standard for typical operating temperatures and standard fits. As no abrasive sealing washers are fitted, the component operates with low friction.