Deep Groove Ball Bearings FAG 6314 -2Z

The FAG 6314-2Z deep-groove ball bearing can withstand high radial loads and, thanks to its dimensions of 70 × 150 × 35 mm, is suitable for demanding shaft mountings.

The 6314-2Z deep groove ball bearing is a single-row rolling bearing from FAG designed for demanding rotational movements in industrial plant. With a bore of 70 mm, an outer diameter of 150 mm and a width of 35 mm, this component is particularly suitable for shaft mountings subject to high radial loads. Manufactured from standard roller bearing steel (100Cr6), the bearing guides the rolling elements within a sturdy sheet steel cage. You receive a ready-to-use machine component for a wide range of designs and repairs.

In which industrial applications is the 6314-2Z deep groove ball bearing used?

This radial ball bearing is primarily used to support shafts subjected to predominantly radial loads in general mechanical engineering. Thanks to its single-row design, the 6314-2Z deep groove ball bearing can accommodate not only high radial forces but also moderate axial forces in both directions. Designs frequently utilise this type in industrial gearboxes and electric motors. The cylindrical outer ring, without a flange or groove, fits precisely into standardised housing bores.

What protection do the cover plates on both sides of the 2Z design offer?

The designation 2Z stands for cover plates fitted on both sides, made from profiled sheet steel. These gap seals protect the interior of the bearing from coarse dirt and dust particles without exerting additional friction on the inner ring. This keeps rotational resistance low, which supports high speeds whilst maintaining a stable operating temperature. In combination with the standard radial bearing clearance and tolerance class P0/PN (ABEC 1), this design is suitable for standard operating conditions between –30 and +120 degrees.