Deep Groove Ball Bearings FAG 16022 -C3

The single-row deep-groove ball bearing 16022 -C3 from FAG Wälzlager, measuring 110 x 170 x 19 mm, offers increased bearing clearance for industrial drives subject to thermal stress.

The 16022 -C3 deep groove ball bearing from FAG Wälzlager is a single-row radial ball bearing from the narrow 160 series. With an inner diameter of 110 mm, an outer diameter of 170 mm and a narrow width of 19 mm, this rolling bearing enables compact designs on larger shafts. It primarily accommodates radial forces as well as moderate axial forces in both directions. Manufactured from standard rolling-bearing steel 100Cr6, this open bearing is characterised by high dimensional stability within a temperature range of -20 to +150 degrees.

What is the 16022-C3 deep groove ball bearing suitable for in mechanical engineering?

This design is primarily used where installation space is limited in the axial direction, but relatively large shaft diameters need to be accommodated. The bearing is suitable for industrial drive systems under continuous load. As it is an open bearing without integrated sealing washers, it can be lubricated directly with oil or grease via an existing housing lubrication system. The design reduces friction losses and ensures smooth running characteristics during continuous operation.

What advantages does the C3 bearing clearance offer in terms of design?

The C3 designation indicates an increased radial bearing clearance compared with the standard version. This slightly increased bearing clearance serves to compensate for operational thermal expansion of the shaft and inner ring without causing the rolling elements to become stressed. Even with tight fits on the shaft or in the housing, sufficient radial clearance is maintained to ensure low-friction operation. Together with the sheet steel cage, this design is rated for operating temperatures of up to +150 degrees and helps to prevent premature wear.