Cylindrical Roller Bearings FAG NJ214 -E-XL-TVP2-C3

The FAG NJ214 -E-XL-TVP2-C3 cylindrical roller bearing, measuring 70x125x24 mm, offers high radial load-carrying capacity and single-sided axial guidance for demanding industrial applications.

The single-row cylindrical roller bearing NJ214 -E-XL-TVP2-C3 accommodates high radial loads whilst also serving as a support bearing. In this design, the outer ring has two fixed flanges, whilst the inner ring has one fixed flange. This allows the inner ring to be removed from one side, which facilitates the installation of the roller bearings. The design complies with tolerance class P0/PN or ABEC 1.

What is the NJ214 -E-XL-TVP2-C3 cylindrical roller bearing suitable for?

Design engineers use this roller bearing when strong radial forces act on the bearing location and the shaft needs to be guided axially in one direction. Typical applications include industrial drives and rotating shaft guides. As the bearing allows axial displacement in one direction, it compensates for temperature-induced changes in the shaft’s length. This helps to prevent axial stress in the drive train and promotes smooth running.

When is the NJ design with a polyamide cage and C3 clearance recommended?

The combination of a polyamide cage and the slightly increased radial clearance (C3) is recommended for applications involving thermal loads or tight fits. The polyamide cage ensures low inertia and quiet running characteristics within a temperature range of –30 to +120 degrees Celsius. The C3 bearing clearance ensures that sufficient radial clearance is maintained even under operational heating conditions. As this is an open bearing without a seal, users can specifically match the lubricant to the external housing seal.