Cylindrical Roller Bearings FAG NU210 -E-XL-TVP2-C3

The FAG NU210 -E-XL-TVP2-C3 cylindrical roller bearing withstands high radial loads and, as a non-locating bearing with a 50 mm bore, compensates for axial length changes.

The NU210 -E-XL-TVP2-C3 cylindrical roller bearing is a single-row roller bearing from FAG designed for demanding industrial applications. With dimensions of a 50 mm bore, 90 mm outer diameter and 20 mm width, this design is suitable for shaft guides with predominantly radial force transmission. As the inner ring is designed to be removable from both sides, the component functions as a conventional non-locating bearing. This allows the inner and outer rings to be fitted separately, which simplifies installation and maintenance work in industrial settings.

What is the NU210 -E-XL-TVP2-C3 cylindrical roller bearing suitable for in mechanical engineering?

This roller bearing is used wherever high radial forces are present and thermally induced changes in shaft length occur. As a non-locating bearing of the NU design, it accommodates radial loads exclusively and allows axial displacement between the shaft and housing without restriction. Typical applications include bearing arrangements subject to high radial loads and general industrial drives. Thanks to its open design without a seal, the rolling bearing can be flexibly integrated into centralised oil or grease lubrication systems.

What advantages do the polyamide cage and C3 bearing clearance offer with this bearing?

The suffixes provide important information for the technical design. The abbreviation TVP2 denotes a solid polyamide cage, which ensures quiet running and exhibits low inertial forces. The increased radial clearance (C3) provides additional leeway in the event of thermal expansion or tight fits, ensuring that the rolling elements do not become stressed even at operating temperatures of up to +120 degrees. When planning, please note that open cylindrical roller bearings require external sealing of the housing.