Cylindrical Roller Bearings FAG NU2206 -E-XL-TVP2-C3

The FAG NU2206 -E-XL-TVP2-C3 single-row cylindrical roller bearing, with dimensions of 30x62x20 mm, offers a high radial load capacity when used as a non-locating bearing.

As an open, single-row cylindrical roller bearing, the NU2206 -E-XL-TVP2-C3 is primarily designed to accommodate very high radial loads. With a bore of 30 mm, an outside diameter of 62 mm and a width of 20 mm, this design is suitable for demanding industrial drives. The NU design functions as a floating bearing, as the inner ring can be removed from both sides. This allows the bearing to compensate for axial length changes in the shaft directly within the bearing. The bearing is manufactured to tolerance class P0/PN or ABEC 1.

In which installation situations is the NU2206 -E-XL-TVP2-C3 cylindrical roller bearing used?

This design is intended for shaft mountings where significant radial forces are present and axial thermal expansion must be compensated for without restriction. As the bearing has an open design, it can be flexibly integrated into on-site oil or grease lubrication systems. The permissible temperature range is from –30 to +120 degrees Celsius. Thanks to its separable design, the outer ring, including the roller set, and the inner ring can be fitted separately.

What is the effect of the C3 clearance and the polyamide cage?

The designation C3 indicates a slightly increased radial clearance compared with the standard version. This increased clearance prevents the rolling elements from jamming when operational heating or tight fits cause the bearing rings to expand. The TVP2 cage, made of polyamide, guides the cylindrical rollers quietly and reduces the weight of the rotating components. When designing the assembly, please note that the NU design cannot transmit axial forces. To provide a complete bearing arrangement, this floating bearing is therefore usually combined with a fixed bearing.