Cylindrical Roller Bearings FAG NU208 -E-XL-TVP2

The FAG NU208 -E-XL-TVP2 cylindrical roller bearing, with dimensions of 40x80x18 mm, withstands high radial loads and compensates for axial length changes without restriction.

The NU208 -E-XL-TVP2 cylindrical roller bearing is a single-row radial roller bearing manufactured by FAG. Thanks to the line contact between the cylindrical rollers and the raceways, the bearing transmits high radial forces. The NU design is characterised by two fixed flanges on the outer ring and a smooth, flangeless inner ring. This allows the inner ring to be removed from both sides, which facilitates assembly and disassembly.

In which installation scenarios does the NU208 -E-XL-TVP2 cylindrical roller bearing function as a non-locating bearing?

This cylindrical roller bearing is used in bearing arrangements where high radial loads are present and the bearing serves purely as a non-locating bearing. Typical applications are found in general mechanical engineering for shaft guides that require axial compensation. As the flangeless inner ring allows for axial displacement of the shaft within the housing, this design helps to prevent thermally induced stresses in the structure. Due to its design, this version does not accommodate pure axial forces.

What properties do the polyamide cage and the open design offer?

The suffix TVP2 indicates a polyamide cage. This material is characterised by its low weight and elastic properties, which contribute to smooth running. The permissible temperature range is from –30 to +120 degrees Celsius. As an open bearing, this model has no integrated seals. The bearing location is therefore integrated into an external lubrication system and protected from ingress of particles by the housing.