Cylindrical Roller Bearings FAG NJ304 -E-XL-TVP2-C3

The FAG single-row cylindrical roller bearing NJ304 -E-XL-TVP2-C3, with dimensions of 20x52x15 mm, offers high radial load-carrying capacity and axial support with increased bearing clearance.

As a radial roller bearing, the FAG NJ304 -E-XL-TVP2-C3 cylindrical roller bearing absorbs high radial forces. With compact main dimensions of 20 mm bore diameter, 52 mm outside diameter and 15 mm width, this design is suitable for demanding installation locations in mechanical engineering. As this is an open bearing without integrated seals, lubrication is provided flexibly via the housing design. The tolerance class P0/PN or ABEC 1 ensures precise fit dimensions for standardised shaft seats.

What is the NJ design suitable for in the NJ304 cylindrical roller bearing?

The NJ design is characterised by two fixed flanges on the outer ring and one fixed flange on the inner ring. As a result, this roller bearing functions as a support bearing that guides shafts in an axial direction and can accommodate axial forces. In the opposite direction, the inner ring – which can be removed from one side – allows for a defined displacement. This feature facilitates the separate assembly of both bearing rings and compensates for thermally induced changes in the shaft’s length during operation without causing binding.

What features do the polyamide cage and C3 clearance offer in this design?

The version with the suffix TVP2 features a lightweight polyamide cage, which promotes quiet running and exhibits low inertial forces during speed changes. At the same time, the slightly increased radial clearance (C3) provides sufficient operating clearance should temperature differences arise between the inner and outer rings, or should tight fits reduce the radial clearance. The permissible temperature range for use is from -30 to +120 degrees, opening up a wide range of applications in mechanical engineering.