FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 8,46 € | 160,91 € |
| 5 | 16,94 € | 152,43 € |
The FAG NJ219 -E-XL-TVP2-C3 cylindrical roller bearing, measuring 95 × 170 × 32 mm, functions as a single-row support bearing for high radial loads.
The FAG NJ219 -E-XL-TVP2-C3 cylindrical roller bearing, as a single-row radial roller bearing, withstands high radial loads and guides shafts in an axial direction. Due to the NJ design, the outer ring has two fixed flanges, whilst the inner ring has one flange and is removable from one side. With key dimensions of a 95 mm bore, 170 mm outer diameter and 32 mm width, this design is suitable for industrial shaft mountings.
This support bearing is suitable for bearing arrangements where, in addition to dominant radial forces, axial guidance forces in one direction must also be accommodated. Typical applications are found in general mechanical and plant engineering for shaft bearings subjected to combined loads. The design allows for a defined axial displacement in the opposite direction, which enables compensation for changes in shaft length resulting from thermal expansion. Thanks to the removable inner ring, the bearing unit can also be fitted separately.
The built-in C3 bearing clearance ensures a slightly increased radial clearance when new. This is advantageous in the case of tight fits or high temperature differences between the inner and outer rings during operation, ensuring that the rollers do not become stressed. The lightweight TVP2 polyamide cage guides the rollers quietly and flexibly. The open bearing, which has no groove or lubrication bore in the outer ring, is designed for an operating temperature range of –30 to +120 degrees and requires an external lubrication and sealing system.
With a bore of 95 mm, an external diameter of 170 mm and a width of 32 mm, the component complies with standardised industrial dimensions. The tolerance class is classified as P0/PN or ABEC 1, which is the standard for normal industrial tolerances in mechanical engineering.
In the NJ design, the outer ring has two fixed flanges and the inner ring has one flange. This means that the bearing acts as a support bearing: it absorbs axial forces in one direction, whilst allowing axial displacement in the opposite direction. The inner ring can be removed from one side for installation.
The designation C3 indicates a slightly increased radial bearing clearance compared with the standard version. The additional radial clearance helps to ensure that the bearing retains sufficient operating clearance even when the shaft heats up or in the case of tight fits, which promotes smooth running during operation.
Polyamide is characterised by its low weight and good damping properties. The polyamide cage guides the cylindrical rollers precisely and quietly, whilst reducing friction. It can withstand mechanical stress and retains its shape within the specified temperature range of -30 to +120 degrees.
As this bearing is designed without integrated seals and without a lubrication hole in the outer ring, lubrication must be provided via the surrounding machine housing. Depending on the design, either grease or oil may be used. In addition, a customer-supplied seal on the housing protects the open roller bearing from the ingress of contaminants.
The permissible temperature range for this bearing is between -30 and +120 degrees Celsius. This range is largely determined by the polyamide cage and the roller bearing structure. When designing the bearing installation, care must be taken to ensure that the selected lubricant retains its lubricating properties within this temperature range.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/