FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 5,82 € | 110,49 € |
| 20 | 11,64 € | 104,67 € |
The FAG NJ216 -E-XL-TVP2-C3 single-row cylindrical roller bearing combines a high radial load capacity with an 80 mm bore, a polyamide cage and increased C3 bearing clearance.
The FAG NJ216 -E-XL-TVP2-C3 cylindrical roller bearing is designed as a single-row rolling bearing for high radial forces. With key dimensions of an 80 mm bore, 140 mm outer diameter and 26 mm width, this bearing can accommodate high radial loads. Thanks to its open design, which has no groove or lubrication bore on the outer ring, the bearing can be integrated directly into existing lubrication systems. The dimensionally stable polyamide cage guides the cylindrical rollers quietly within an operating temperature range of -30 to +120 degrees Celsius.
The NJ design functions as a support bearing and accommodates radial forces as well as axial guidance forces from one direction. In combination with a suitable mating bearing, axial changes in shaft length can be compensated for. Typical applications include shaft mountings subject to one-sided axial forces and high radial loads, where precise guidance and radial load-carrying capacity are required.
The TVP2 design refers to a polyamide window cage, which reduces the bearing’s own weight and promotes smooth running. The increased radial clearance (C3) compensates for thermal expansion at higher operating temperatures. Tight fits on the shaft and housing reduce the internal bearing clearance during operation without causing the bearing to become stressed. Before assembly, note that the inner ring can be removed from one side, which simplifies installation.
The bearing has a cylindrical bore of 80 mm, an outer diameter of 140 mm and a width of 26 mm. Thanks to these standardised dimensions, the single-row cylindrical roller bearing can be integrated with a precise fit into housing bores and onto shafts according to standard fits.
TVP2 refers to a solid polyamide window cage. This type of cage is characterised by low inertia, good damping properties and quiet operation. It is specified for operating temperatures ranging from -30 to +120 degrees Celsius and is suitable for standard applications in mechanical engineering.
The increased bearing clearance C3 provides additional radial clearance compared with the standard version. In the case of tight fits or temperature differences between the shaft and the housing, this clearance prevents the rolling elements from becoming stressed. As a result, the bearing runs freely and with low friction, even under thermal stress.
With two solid flanges on the outer ring and one solid flange on the inner ring, the NJ design absorbs radial forces and provides axial support for the shaft in one direction. The inner ring can be withdrawn from one side, which makes it easier to fit the rings separately.
As the bearing is an open design with neither integrated seals nor lubrication holes in the outer ring, oil or grease is supplied externally via the housing design. To prevent contamination, external seals, such as shaft seals, must be incorporated into the surrounding structure.
The bearing is manufactured to tolerance class P0 or PN (standard tolerance), which corresponds internationally to the ABEC 1 classification. This tolerance class offers practical concentricity and dimensional accuracy for industrial drives and bearing arrangements.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/