FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 7,93 € | 150,59 € |
| 20 | 15,85 € | 142,67 € |
FAG single-row cylindrical roller bearing NJ212 -E-XL-M1-C3 with a 60 mm bore, brass cage and C3 clearance for radial loads with single-sided axial guidance.
The FAG NJ212 -E-XL-M1-C3 cylindrical roller bearing is a single-row radial roller bearing designed for demanding industrial applications. Thanks to the line contact between the rollers and raceways, this bearing can accommodate high radial forces. With key dimensions of 60 mm inner diameter, 110 mm outer diameter and 22 mm width, the NJ design functions as a support bearing. The outer ring has two fixed flanges, whilst the inner ring is designed to be removable from one side and can accommodate axial forces from one direction.
The bearing is primarily used for high radial loads when, in addition, single-sided axial guidance of the shaft is required. As a support bearing, this design accommodates single-sided axial forces. The fact that it can be dismantled simplifies assembly, as the inner and outer rings can be fitted separately. Axial displacement in the opposite direction compensates for operational changes in the shaft’s length.
The M1 designation denotes a solid brass cage which guides the rollers and withstands mechanical stresses or vibrations. The additional designation C3 indicates a slightly increased radial clearance compared with the standard version. This increased operating clearance compensates for fit oversizes and temperature differences between the inner and outer rings during operation, without the bearing becoming stressed. As an open bearing without an integrated seal, the NJ212 can be flexibly integrated into external lubrication circuits using oil or grease.
The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. This allows the bearing to act as a support bearing: in addition to high radial forces, it also absorbs axial guidance forces from one direction, whilst axial displacement in the opposite direction remains possible.
The bearing has a bore of 60 mm, an outer diameter of 110 mm and a width of 22 mm. These dimensions determine the installation conditions and ensure a precise fit on shafts and in bearing housings.
The designation C3 indicates a larger radial bearing clearance in the initial state. If the bearing heats up during operation, or if tight fits on the shaft and housing reduce the radial clearance, the C3 bearing clearance counteracts premature jamming of the rolling elements and improves concentricity.
The M1 cage is made of brass and guides the cylindrical rollers with precision. Brass cages are characterised by high dimensional stability and resistance to vibrations and shock loads. They are therefore suitable for more demanding operating environments in continuous industrial use.
The roller bearing is designed for an operating temperature range of -30 to +150 degrees. As this is an open bearing without elastic sliding seals, the actual operating limit depends primarily on the temperature resistance of the selected grease or oil.
The cylindrical roller bearing is manufactured to tolerance class P0/PN, which corresponds to ABEC 1. This represents the standard industrial specification for dimensional and runout tolerances and meets the typical requirements of general mechanical engineering.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/