NJ211 -E-XL-TVP2-C3 Cylindrical Roller Bearings by FAG
NJ211 -E-XL-TVP2-C3 Cylindrical Roller Bearings by FAG

FAG

Cylindrical Roller Bearings FAG NJ211 -E-XL-TVP2-C3

Technical data
 
Inner diameter
55 mm
Outer diameter
100 mm
Width
21 mm
Roller rows
Single row bearing
Seal
None, open bearing
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Current insulation
No current insulation
Bore
Cylindrical bore
Outer ring
Without groove/lubrication holes
Weight
0,678 kg
Scale quantity Your discount Unit price
15 3,58 € 68,00 €
30 7,15 € 64,43 €
71,58 €
inkl. MwSt, zzgl. Versandkosten

32 ready to ship

Cylindrical Roller Bearings FAG NJ211 -E-XL-TVP2-C3
In Stock

Cylindrical Roller Bearings FAG NJ211 -E-XL-TVP2-C3

The FAG NJ211 -E-XL-TVP2-C3 cylindrical roller bearing (55x100x21 mm) accommodates high radial loads and provides single-sided axial support for shafts as a support bearing.

This single-row cylindrical roller bearing NJ211 -E-XL-TVP2-C3 from FAG is designed for demanding radial loads in mechanical engineering. In the NJ design, the outer ring has two solid flanges, whilst the inner ring has one solid flange. This enables the bearing to support axial forces from one direction. The integrated polyamide cage ensures quiet running of the roller elements and keeps the weight of the rotating parts to a minimum.

In which installation situations is the NJ211 -E-XL-TVP2-C3 cylindrical roller bearing used?

The support bearing version is suitable for designs in which high radial forces act on the shaft and, at the same time, single-sided axial guidance is required. Due to its flange arrangement, the bearing fixes the shaft in one direction but allows axial displacement in the opposite direction. Shafts subject to thermal linear expansion benefit from this property, as it helps to reduce mechanical stresses within the system.

What are the functions of the support bearing design and C3 bearing clearance?

The slightly increased radial clearance (C3) provides greater radial play compared with standard clearance. This play compensates for fit allowances and temperature differences between the inner and outer rings during operation. As the inner ring can be removed from one side, assembly onto the shaft and housing can be carried out separately. As an open bearing without an integrated seal, provision must be made for a lubricant supply and external sealing in the housing environment.

What are the main dimensions of the NJ211 -E-XL-TVP2-C3 cylindrical roller bearing?

With a bore diameter of 55 mm, an outer diameter of 100 mm and a width of 21 mm, this single-row roller bearing complies with tolerance class P0/PN or ABEC 1. The outer ring is designed without a groove or lubrication bore.

What does the ‘NJ’ design designation mean for this bearing?

The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables the component to function as a thrust bearing: it absorbs radial loads and supports the shaft in one axial direction, whilst allowing for axial movement in the opposite direction.

Why has bearing air class C3 been chosen?

C3 denotes a slightly increased radial bearing clearance compared with the standard version. This additional radial clearance prevents the rollers from seizing up should the bearing heat up during operation or should tight fits on the shaft cause the inner ring to expand.

What are the characteristics of the TVP2 polyamide cage?

The designation TVP2 refers to a polyamide cage. This material is characterised by good sliding properties, low inertia and smooth running. The design is suitable for a temperature range of -30 to +120 degrees.

Is the bearing sealed or greased?

As an open bearing, this design does not have any integrated sealing washers. Suitable lubrication and protection against foreign matter and moisture must be provided by the surrounding housing structure.

Can the inner ring be separated for fitting?

The inner ring is designed to be removable from one side. This feature allows the outer ring, together with the roller set, to be fitted separately into the housing, whilst the inner ring is fitted onto the shaft; this simplifies the assembly process for tight fits.

Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/

10002168
Product added to compare.
Product added to wishlist

Reset Password

New Account Register