SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 2,68 € | 50,83 € |
| 30 | 5,35 € | 48,16 € |
The SKF NJ210 ECP cylindrical roller bearing is a single-row support bearing measuring 50x90x20 mm, designed for radial loads in industrial assemblies.
The NJ210 ECP cylindrical roller bearing is an open, single-row radial roller bearing of the NJ design. This SKF product has a bore of 50 mm, an outside diameter of 90 mm and a width of 20 mm. As a support bearing, this design accommodates radial loads and allows axial displacement of the shaft relative to the housing in one direction. To this end, the inner ring is designed to be removable from one side, which facilitates the assembly of the individual rings.
This bearing is used in shaft support arrangements where high radial forces are present and thermally induced changes in shaft length need to be compensated for. The NJ design provides single-sided axial guidance. Thanks to its design in the SKF Explorer performance class with an optimised internal structure, the roller bearing is designed for demanding operating conditions in continuous industrial service. As it is an open bearing without an integrated seal, it is integrated into an external lubrication system using oil or grease.
The polyamide cage in the ECP variant guides the cylindrical rollers precisely and is characterised by its low weight. This cage design reduces inertial forces and friction within the bearing, contributing to smooth running. The bearing is designed for a temperature range of -30 to +120 degrees. The dimensional accuracy complies with tolerance class P0 or Standard (ABEC 1), whilst the running accuracy is manufactured to tolerance class P6 (ABEC 3).
The NJ type has two fixed flanges on the outer ring and one fixed flange on the inner ring. This means that the bearing acts as a thrust bearing: it supports radial loads and guides the shaft in the axial direction. In the opposite direction, the removable inner ring allows for axial displacement.
The bearing has an internal diameter of 50 mm, an external diameter of 90 mm and a width of 20 mm. The outer ring is designed without a lubrication groove or lubrication bore. These dimensions allow it to be fitted into appropriately sized housings and bearing seats.
The ECP designation indicates an optimised internal design, which at SKF falls within the Explorer performance class. The letter P stands for a polyamide cage. This combination reduces the weight of the rotating parts and ensures favourable friction conditions at the rolling element contact points.
This cylindrical roller bearing is manufactured with a standard radial clearance. The standard clearance is suitable for the majority of typical installation situations involving standard fit selections on the shaft and housing, as well as for moderate operating temperatures without extreme thermal expansion.
The cylindrical roller bearing is specified for operating temperatures ranging from -30 to +120 degrees. This range is largely determined by the temperature resistance of the polyamide cage. When designing the bearing arrangement, care must be taken to ensure that the selected external lubricant is also approved for the intended operating temperature.
The bearing is of an open design without integrated sealing washers. It therefore requires the housing to be sealed externally to prevent the ingress of dirt and moisture. Thanks to the open design, the lubricant – whether grease or oil – reaches the rolling elements and raceways directly.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership