FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 2,38 € | 45,16 € |
| 30 | 4,76 € | 42,78 € |
The FAG single-row cylindrical roller bearing NJ209 -E-XL-TVP2-C3, measuring 45 x 85 x 19 mm, can accommodate high radial forces as well as unilateral axial loads.
The NJ209 -E-XL-TVP2-C3 cylindrical roller bearing is a single-row rolling bearing with a 45 mm bore, an 85 mm outer diameter and a width of 19 mm. This FAG bearing belongs to the support bearing design and enables axial guidance of the shaft in one direction, whilst allowing axial displacement in the opposite direction. Due to the line contact of the cylindrical rollers, this design can withstand considerable radial loads. As an open rolling bearing without an integrated seal, it operates in oil- or grease-lubricated environments.
Design engineers select this design for shaft mountings where high radial forces and unilateral axial forces act together. Typical applications are found in bearing arrangements in general mechanical engineering subject to combined loads. As the inner ring can be removed from one side, installation is user-friendly even with tight fits. The bearing acts as a support bearing and compensates for changes in shaft length caused by thermal effects in one direction without forcing, whilst avoiding impermissible stress on the rolling elements.
The suffix TVP2 denotes a polyamide cage, which ensures low inertial forces and smooth running. The C3 designation indicates a slightly increased radial clearance compared with the standard version. This additional operating clearance compensates for operational heating or tight fits, ensuring that the bearing does not seize during operation. The permissible temperature range is from –30 to +120 degrees. The tolerance class complies with the P0/PN or ABEC 1 specifications.
The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables the rolling bearing to function as a support bearing: in addition to high radial loads, it also absorbs axial forces from one direction. In the opposite direction, this design allows for axial displacement. Furthermore, the inner ring can be pulled off on one side for installation.
This single-row cylindrical roller bearing has an inner diameter of 45 mm, an outer diameter of 85 mm and a width across flats of 19 mm. The manufacturing accuracy corresponds to the standard tolerance class P0 or ABEC 1. The outer ring is designed without a lubrication groove or bore, which is why the lubricant is supplied from the side via the adjacent structure.
Bearing clearance class C3 means that, on delivery, the bearing has greater radial clearance than the standard version. This is recommended for applications involving high operating temperatures or tight press fits on the shaft and housing. Thanks to the initially greater clearance, the necessary operating clearance is maintained even after the rings have expanded radially.
The abbreviation TVP2 refers to a polyamide cage. This material is characterised by its low weight and good damping properties, which reduce noise during operation. The cage maintains the cylindrical rollers at a uniform distance apart. It is designed for operating temperatures ranging from -30 to +120 degrees.
As this is an open roller bearing without integrated sealing washers, the bearing requires a lubricant from the surrounding assembly, such as lubricating oil in the gearbox or a suitable grease filling in the bearing housing. The housing design should protect the bearing from dirt and moisture in order to ensure a long service life for the rolling element pair.
Yes, the inner ring of this type of support bearing can be removed from one side. This feature makes assembly and disassembly considerably easier in confined spaces or where there are tight shaft fits. The shaft and inner ring can be fitted with the roller set independently of the outer ring before the two assemblies are brought together axially.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/