NJ208 -E-XL-TVP2-C3 Cylindrical Roller Bearings by FAG
NJ208 -E-XL-TVP2-C3 Cylindrical Roller Bearings by FAG

FAG

Cylindrical Roller Bearings FAG NJ208 -E-XL-TVP2-C3

Technical data
 
Inner diameter
40 mm
Outer diameter
80 mm
Width
18 mm
Roller rows
Single row bearing
Seal
None, open bearing
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Current insulation
No current insulation
Bore
Cylindrical bore
Outer ring
Without groove/lubrication holes
Weight
0,389 kg
Scale quantity Your discount Unit price
25 2,33 € 44,32 €
35 4,66 € 41,99 €
46,65 €
exkl. MwSt, zzgl. Versandkosten

31 ready to ship

Cylindrical Roller Bearings FAG NJ208 -E-XL-TVP2-C3
In Stock

Cylindrical Roller Bearings FAG NJ208 -E-XL-TVP2-C3

The FAG NJ208 -E-XL-TVP2-C3 cylindrical roller bearing, measuring 40x80x18 mm, offers high radial load-carrying capacity and axial guidance for demanding industrial drives.

The single-row cylindrical roller bearing NJ208 -E-XL-TVP2-C3 from FAG accommodates high radial loads. Thanks to the line contact between the cylindrical rollers and the raceways, this design offers high rigidity. The NJ version has two fixed flanges on the outer ring and one fixed flange on the inner ring. As a result, the design acts as a support bearing, guiding shafts in an axial direction and compensating for axial displacement in the opposite direction.

What loads does the NJ208 -E-XL-TVP2-C3 cylindrical roller bearing accommodate?

The radial roller bearing is designed for radial loads whilst simultaneously providing single-sided axial guidance. The design supports axial forces from one direction, whilst the opposite side remains free to move. The inner ring can be removed from one side, which allows the inner and outer rings to be fitted separately. The integrated polyamide cage guides the rolling elements precisely and contributes to quiet operation.

What is the function of the support bearing design and C3 clearance?

The combination of the NJ design and increased C3 radial clearance is suitable for applications involving thermal loads or press fits. If the shaft heats up more than the housing during operation, the increased radial clearance compensates for thermal expansion without the bearing becoming stressed. As this is an open bearing without an integrated seal, an external lubricant supply and a housing seal are required. The bearing is suitable for operating temperatures ranging from -30 to +120 degrees.

What are the design features of the NJ208 -E-XL-TVP2-C3 cylindrical roller bearing?

The NJ design features two fixed flanges on the outer ring and one fixed flange on the removable inner ring. This design functions as a support bearing. It absorbs high radial forces whilst simultaneously guiding the mounted shaft in an axial direction, whilst allowing for axial length compensation in the opposite direction.

What are the dimensions of the NJ208 cylindrical roller bearing?

The bearing has an inside diameter of 40 mm, an outside diameter of 80 mm and a width of 18 mm. When designing the shaft and the bearing housing, these key dimensions and the fact that the inner ring can be removed from one side must be taken into account.

What does the designation ‘C3’ mean for this bearing?

The suffix C3 indicates increased radial bearing clearance compared with the standard version. This additional clearance prevents the rolling elements from becoming jammed should temperature differences arise between the shaft and the housing during operation, or should tight fits reduce the radial bearing clearance after installation.

What are the characteristics of the TVP2 polyamide cage?

The cage, designated TVP2, is made of polyamide and houses the low-mass rollers. This material absorbs shocks, reduces running noise and keeps friction to a minimum. The permissible temperature range for this cage design is between -30 and +120 degrees.

Does the NJ208 open cylindrical roller bearing need to be lubricated?

As this cylindrical roller bearing is supplied without integrated sealing washers, it requires lubrication via the surrounding system. Depending on the design, lubrication is provided by grease or via an oil circuit. The adjacent structure must prevent the ingress of dirt and moisture by means of external seals.

In which tolerance class is the bearing manufactured?

The bearing complies with the standard tolerance class P0 or PN, which corresponds to the ABEC 1 classification. This precision class meets standard requirements in general mechanical engineering and industrial drive technology.

Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/

10002125
Product added to compare.
Product added to wishlist

Reset Password

New Account Register