FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 2,00 € | 37,97 € |
| 35 | 4,00 € | 35,97 € |
The FAG NJ207 -E-XL-TVP2-C3 cylindrical roller bearing, with a 35 mm bore and an outer diameter of 72 mm, offers high radial load-carrying capacity when used as a support bearing.
The FAG NJ207 -E-XL-TVP2-C3 cylindrical roller bearing is a single-row radial roller bearing designed for demanding industrial applications. With a bore of 35 mm, an outer diameter of 72 mm and a width of 17 mm, this open bearing is primarily designed to accommodate very high radial loads. As an NJ design, this version features two fixed flanges on the outer ring and one fixed flange on the inner ring. This makes the bearing suitable for single-sided axial guidance of shafts.
This single-row cylindrical roller bearing is used in industrial shaft bearings where high radial forces must be accommodated. Thanks to its NJ design, the unit functions as a support bearing. It accommodates axial forces from one direction and allows axial displacement in the opposite direction. The inner ring can be removed from one side, which simplifies installation in the case of tight fits and facilitates maintenance work at the bearing location.
The inclusion of a polyamide cage (TVP2) ensures smooth and quiet running of the cylindrical rollers. This material limits the permissible temperature range to –30 to +120 degrees Celsius. The increased radial clearance (C3) helps to compensate for thermal expansion during operation as well as for oversize fits on the shaft and housing. As the bearing is of an open design and the outer ring has no lubrication bore, the lubricant is supplied directly via the installation space.
This single-row bearing has an inner diameter of 35 mm, an outer diameter of 72 mm and a width of 17 mm. It is manufactured to tolerance class P0 or ABEC 1. Thanks to these standardised key dimensions, the component can be fitted precisely into existing housings and onto standardised shaft seats.
The NJ design features two fixed flanges on the outer ring and one flange on the inner ring. This design enables the bearing to be used as a thrust bearing: the bearing absorbs radial forces and supports axial forces from one direction. In the opposite direction, the design allows for axial length compensation of the shaft relative to the bearing housing.
The designation C3 indicates a radial clearance in the bearing that is slightly greater than that of standard bearings. This counteracts any tightening of the bearing caused by heating during operation or by tight fits on the shaft and housing. This ensures that the rolling elements continue to run smoothly even when the components expand due to heat.
The polyamide cage is characterised by its low weight, elasticity and good running characteristics. It guides the cylindrical rollers quietly and is suitable for operating temperatures ranging from -30 to +120 degrees Celsius. At higher temperatures, the material reaches its thermal limits.
As the bearing has neither sealing washers nor lubrication grooves in the outer ring, grease or lubricating oil is supplied via the surrounding housing. The open design allows for unimpeded lubricant exchange, but requires the bearing housing to be sealed externally against dirt and moisture.
The inner ring is designed to be removable from one side. This feature makes it easier to fit and remove the inner and outer rings separately. Users can fit the rings onto the shaft and housing one after the other, which minimises the risk of damage to the raceways during installation.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/