FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 1,73 € | 32,93 € |
| 35 | 3,46 € | 31,20 € |
The FAG NJ206 -E-XL-TVP2-C3 cylindrical roller bearing, with dimensions of 30x62x16 mm and a C3 clearance, offers a robust solution for high radial loads with axial guidance.
The NJ206 -E-XL-TVP2-C3 cylindrical roller bearing is a single-row radial roller bearing from FAG designed for demanding industrial applications. Roller bearings transmit high radial forces via their modified line contact whilst maintaining a compact design. In the NJ version, this model functions as a support bearing, guiding the shaft radially and absorbing axial forces from one direction. The combination of a polyamide cage and increased bearing clearance allows for use under dynamic loads and during operational heating.
This roller bearing is suitable for bearing arrangements where high continuous radial loads occur. Thanks to the two fixed flanges on the outer ring and the single-sided flange on the inner ring, the bearing accommodates axial guiding forces in one direction. In the opposite direction, the removable inner ring allows the shaft to expand and contract freely. Designers prefer to use this feature in combination with a floating bearing to compensate for temperature-induced shaft expansion without causing internal stresses in the bearing arrangement.
The suffixes denote factory-fitted features for operating conditions involving thermal and dynamic stresses. The abbreviation TVP2 stands for a polyamide cage that combines low weight with elastic rolling element guidance. The increased radial clearance (C3) compensates for dimensional changes when tight fits or temperature differences between the inner and outer rings reduce the operating clearance. As this is an open bearing without an integrated seal, the lubricant is supplied via the surrounding housing.
The bearing has an inside diameter of 30 mm, an outside diameter of 62 mm and a width across flats of 16 mm. These dimensions define the space required in the housing and on the shaft seat, and determine which bearing position it corresponds to.
The designation NJ defines the arrangement of the flanges. The outer ring has two fixed flanges, whilst the inner ring has only one flange. This allows the inner ring to be pulled out axially on one side, which facilitates the separate assembly of both bearing rings and enables single-sided axial guidance.
The C3 designation indicates a slightly increased radial clearance compared with the standard version. This additional clearance prevents the bearing from seizing up when it heats up during operation or after being pressed onto fixed shaft seats, thereby maintaining the necessary freedom of movement of the rollers.
The cage, designated TVP2, is made of polyamide. This material reduces the weight of the rolling element set, operates quietly and offers elastic guiding properties. The material is suitable for the intended temperature range of -30 to +120 degrees Celsius.
The permissible operating range is between -30 and +120 degrees Celsius. This range is essentially limited by the thermal resistance of the polyamide cage. To ensure smooth operation, the lubricant used must also be approved for the selected operating temperature.
No, this is an open bearing without its own sealing washers. Furthermore, the outer ring is designed without a lubrication groove or lubrication bore. Protection against contamination and lubrication with oil or grease must be provided entirely by the surrounding housing structure.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/