FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 2,78 € | 53,02 € |
| 30 | 5,57 € | 50,23 € |
The FAG NJ206 -E-XL-M1-C3 cylindrical roller bearing, with dimensions of 30x62x16 mm, offers high radial load capacity and axial guidance in one direction.
The single-row cylindrical roller bearing NJ206 -E-XL-M1-C3 can accommodate high radial loads and, thanks to its NJ design, functions as a support bearing. The inner ring has a fixed flange and can be removed from one side, which means the bearing limits axial displacement of the shaft in one direction. As an open rolling bearing without seals, it is integrated directly into oil- or grease-lubricated housings. It is manufactured to tolerance class P0/PN (ABEC 1) for standardised industrial applications.
This cylindrical roller bearing is particularly suitable for bearing arrangements subject to predominantly radial forces, where unilateral guiding forces in the axial direction also occur. Typical applications are found in general mechanical and plant engineering for shaft guides subjected to combined radial and axial forces. As the inner ring is removable, the design facilitates the assembly and disassembly of the individual rings. Designers frequently use the NJ version in combination with a floating bearing or an additional support bearing to achieve a defined axial guidance.
The combination of a solid brass cage (M1) and increased radial clearance (C3) is recommended for demanding operating conditions. The brass cage guides the cylindrical rollers precisely and withstands high accelerations and vibrations. The increased C3 bearing clearance compensates for thermal expansion when a temperature difference arises between the shaft and the housing during operation. The permissible temperature range extends from –30 to +150 degrees Celsius, enabling a wide range of applications in hot machine environments.
The bearing has an inside diameter of 30 mm, an outside diameter of 62 mm and a width of 16 mm. These standardised key dimensions correspond to the standard size series for NJ206 roller bearings. Before fitting, you should ensure that the seat on the shaft and the housing bore are adjusted to these dimensions.
The designation ‘NJ’ refers to a cylindrical roller bearing with two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables the component to act as a support bearing: in addition to high radial forces, it also accommodates axial loads from one direction. In the opposite direction, this design allows for free axial movement.
C3 denotes a radial bearing clearance that is slightly greater than standard. This clearance between the rollers and the raceway helps to ensure that the bearing does not become stressed, even when the shaft and inner ring undergo thermal expansion. C3 is selected when temperature variations occur during operation or when tight fits are used.
As the bearing is designed without integrated sealing washers, the design requires the housing to be sealed externally against dirt and lubricant loss. You can lubricate the roller bearing flexibly using grease or lubricating oil. The lubricant selected should be suitable for a temperature range of -30 to +150 degrees Celsius.
A solid brass cage ensures the rollers are guided securely at higher speeds, and under vibrations and shock loads. The material is characterised by favourable sliding properties and mechanical stability. Compared with standard sheet metal cages, the solid brass version remains more dimensionally stable and is more resistant to dynamic forces.
The cylindrical roller bearing complies with the standard tolerances of class P0 or PN, which corresponds to the ABEC 1 rating. This standard tolerance defines limit dimensions for the bore, outer diameter and running accuracy. It fully meets the requirements of most industrial applications in mechanical engineering and gearbox construction.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/