Cylindrical Roller Bearings FAG NUP2315 -E-XL-TVP2

Single-row cylindrical roller bearing NUP2315 -E-XL-TVP2 with a 75 mm bore, 160 mm outer diameter and a polyamide cage for radial loads and axial guidance on both sides.

The NUP2315 -E-XL-TVP2 cylindrical roller bearing from FAG is a single-row roller bearing designed for demanding industrial applications. Thanks to the line contact between the cylindrical rollers and the raceways, this design can accommodate high radial forces. With a bore of 75 mm, an outside diameter of 160 mm and a width of 55 mm, the bearing is suitable for heavy-duty shaft support in mechanical and plant engineering.

What is the NUP2315 -E-XL-TVP2 cylindrical roller bearing suitable for as a fixed bearing?

As a fixed bearing of the NUP design, this version guides a shaft in both axial directions. The outer ring has two fixed flanges, whilst the inner ring has one fixed flange and one loose flange disc. As a result, the bearing arrangement accommodates not only primarily radial forces but also alternating axial loads. Typical applications include bearing arrangements subject to combined loads, where defined axial guidance of the shaft position is required.

What are the distinctive features of the TVP2 cage design?

The bearing is fitted with a window-type cage made of polyamide, identifiable by the suffix TVP2. This material reduces the weight of the rotating components and promotes smooth running. As an open cylindrical roller bearing, this design has no integrated seal and is rated for an operating temperature range of -30 to +120 degrees. A housing seal must be provided by the customer for lubrication and protection against contamination.