Cylindrical Roller Bearings FAG NJ2206 -E-XL-TVP2

The FAG NJ2206 -E-XL-TVP2 cylindrical roller bearing (30x62x20 mm) accommodates high radial loads as well as unilateral axial forces.

This single-row cylindrical roller bearing, model NJ2206 -E-XL-TVP2 from FAG, combines a high radial load capacity with a support bearing function. The main dimensions are a bore diameter of 30 mm, an outer diameter of 62 mm and a width of 20 mm. Due to the NJ design, the bearing has two fixed flanges on the outer ring and one fixed flange on the inner ring. This allows the bearing to accommodate axial forces in one direction, whilst the inner ring remains removable from one side to facilitate installation.

What is the NJ2206 -E-XL-TVP2 cylindrical roller bearing suitable for as a support bearing?

Designs subject to high radial loads benefit from the rigid construction of this rolling bearing. It serves as a support bearing in bearing arrangements where shaft positions must be guided in an axial direction. In the event of thermal length changes in the shaft, the design allows for the necessary axial displacement in the opposite direction. As the inner ring is removable from one side, the inner and outer rings can be fitted separately, which simplifies installation in confined spaces.

What are the distinctive features of the version with a TVP2 cage?

The suffix TVP2 denotes a polyamide cage that guides the cylindrical rollers. Polyamide is characterised by its low weight and promotes vibration-damped, quiet running. The bearing is designed for use within a temperature range of -30 to +120 degrees. As this is an open bearing without a seal and without a groove or lubrication bore in the outer ring, the lubricant is supplied directly via the housing design.