Cylindrical Roller Bearings FAG NU207 -E-XL-K-TVP2

The FAG NU207 -E-XL-K-TVP2 cylindrical roller bearing, with a 35 mm tapered bore and a polyamide cage, offers a robust solution for high radial loads.

The FAG NU207 -E-XL-K-TVP2 cylindrical roller bearing is a single-row radial roller bearing designed for demanding industrial applications. With key dimensions of a 35 mm bore, 72 mm outside diameter and 17 mm width, this design can accommodate high radial loads. The NU design functions as a pure idler bearing, in which the inner ring can be removed from both sides. This facilitates the separate installation of both bearing rings during machine maintenance and allows for force-free longitudinal compensation of shafts during operation.

In which applications does the NU207 -E-XL-K-TVP2 cylindrical roller bearing prove its worth?

Design engineers and maintenance personnel use this bearing design wherever predominantly radial forces occur and thermal linear expansion of the shaft needs to be compensated for. Typical applications are found in general industrial drives and mechanical assemblies. As the outer ring has fixed flanges and guides the cylindrical rollers, the smooth inner ring can move freely in the axial direction. The polyamide cage ensures quiet running of the rolling elements within a temperature range of –30 to +120 degrees Celsius.

What are the specific features of the tapered bore during assembly?

The suffix ‘K’ denotes a tapered bore with a taper ratio of 1:12. This design allows for direct mounting on tapered shaft seats or installation on cylindrical shafts using a shrink sleeve. By sliding the bearing axially onto the taper, the standard radial clearance can be precisely adjusted during installation. As an open bearing, this design has no integrated seals, allowing grease or lubricating oil to circulate freely. Protection against dirt and moisture is provided by an external seal in the bearing housing.