FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 8,71 € | 165,51 € |
| 5 | 17,42 € | 156,80 € |
The FAG NJ2310 -E-M1A cylindrical roller bearing, with dimensions of 50 × 110 × 40 mm, can accommodate high radial loads as well as axial guidance forces in one direction.
The FAG NJ2310 -E-M1A cylindrical roller bearing is a single-row rolling bearing designed for industrial gearboxes and mechanical assemblies subject to high radial loads. With an inside diameter of 50 mm, an outside diameter of 110 mm and a width of 40 mm, the design combines a compact footprint with considerable rigidity. As an open bearing without a seal, the unit can be lubricated directly with oil or grease via existing lubrication systems.
This design functions as a support bearing that guides a shaft in an axial direction whilst simultaneously allowing axial displacement in the opposite direction. The inner ring is designed to be removable from one side, which facilitates the separate installation of the outer and inner rings. It is used in applications where thermal length changes in the shaft must be compensated for without constraint, whilst heavy radial loads act on the bearing journal.
The suffix M1A denotes a solid, externally guided brass cage. The external guidance on the outer ring ensures smooth running of the rollers during rapid speed changes or sustained vibrations. With a permissible temperature range of -30 to +150 degrees, standard radial clearance and the standard tolerance P0/PN (ABEC 1), the bearing unit can be used for standardised fits in general mechanical and plant engineering.
The bearing has a bore of 50 mm, an outer diameter of 110 mm and a width of 40 mm. These dimensions allow for a precise fit when installed on suitable shaft seats. The outer ring has neither a circumferential groove nor lubrication holes, so the lubricant is supplied from the end face or via the machine housing.
The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables the component to withstand very high radial forces and also guides the shaft axially in one direction. As the inner ring can be removed from one side, the bearing rings can be fitted separately during assembly.
The designation M1A refers to a solid brass cage mounted on the outer ring. The solid construction ensures dimensional stability under impact loads. The mounting on the outer ring keeps the cylindrical rollers in position even at varying speeds and under demanding operating conditions.
The bearing is designed for operating temperatures ranging from -30 to +150 degrees. Both the rolling elements and rings, as well as the brass cage, retain their dimensional stability within this range. When selecting a lubricant, care must be taken to ensure that the grease or gear oil used is approved for the temperatures actually encountered in the system.
As an open-type bearing, this bearing deliberately does not incorporate integrated sealing washers. This allows the lubricant from the surrounding system – for example, in an oil-bath gearbox – to reach the raceways unimpeded. In the case of open bearings, protection against dirt and moisture is provided by external seals in the surrounding housing structure.
The roller bearing has a standard radial clearance and a tolerance class of P0/PN, which corresponds to the ABEC 1 standard. This classification covers common industrial applications. With standard fits on the shaft and housing, the operating clearance remains within the specified limits without causing undesirable stresses in the roller set.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/