Cylindrical Roller Bearings FAG NUP2210 -E-XL-TVP2-C3

The FAG NUP2210 -E-XL-TVP2-C3 cylindrical roller bearing is a heavy-duty fixed bearing with a 50 mm bore diameter, designed for demanding radial loads in mechanical engineering.

The NUP2210 -E-XL-TVP2-C3 cylindrical roller bearing is a single-row radial roller bearing from FAG designed for high radial forces. As a fixed bearing, the NUP design accommodates not only the main load but also axial forces in both directions. With dimensions of a 50 mm bore, 90 mm outside diameter and 23 mm width, this design is suitable for compact installation spaces in general mechanical and plant engineering.

When is the NUP2210 -E-XL-TVP2-C3 cylindrical roller bearing suitable as a fixed bearing?

The NUP design is characterised by two fixed flanges on the outer ring, as well as one fixed flange and one loose flange disc on the inner ring. As a result, the rolling bearing guides the shaft axially in both directions and absorbs short-term axial forces. Design engineers primarily use this variant where shaft positions need to be precisely fixed and high radial forces are acting at the same time. The version with standard tolerance P0 is designed for a precise fit on standard shafts.

What advantages do the polyamide cage and C3 bearing clearance offer with this bearing?

The polyamide cage ensures low inertia and promotes low-vibration, low-noise operation. The increased radial clearance (C3) compensates for operational heating and tight fit allowances without causing the rollers to become stressed. With a permissible temperature range of -30 to +120 degrees, this open bearing operates flawlessly in many industrial environments. As this roller bearing is supplied without sealing washers, you can regulate the lubricant supply via the surrounding housing.