Cylindrical Roller Bearings FAG NU314 -E-XL-TVP2-C3

The FAG NU314 -E-XL-TVP2-C3 cylindrical roller bearing, a single-row idler bearing measuring 70x150x35 mm, offers high radial load-carrying capacity and thermal compensation.

The FAG NU314 -E-XL-TVP2-C3 cylindrical roller bearing is a single-row radial roller bearing designed for demanding industrial applications. With a bore of 70 mm, an outer diameter of 150 mm and a width of 35 mm, this open bearing can accommodate high radial forces. The removable inner ring without a flange significantly simplifies installation and maintenance. Manufactured to tolerance class P0/PN (ABEC 1), the component meets the fundamental requirements for concentricity and dimensional accuracy in mechanical engineering.

What is the NU314 -E-XL-TVP2-C3 cylindrical roller bearing suitable for in machinery?

This cylindrical roller bearing typically functions as a non-locating bearing on shafts subject to high radial loads. As the inner ring is designed to be removable from both sides, the bearing compensates internally and without constraint for axial changes in shaft length resulting from thermal expansion. Typical applications include shaft mountings where only pure radial forces are to be accommodated. The open design allows for flexible lubrication with oil or grease in accordance with the specifications of the overall system.

What are the advantages of the TVP2 polyamide cage and the C3 clearance?

The designation TVP2 indicates a polyamide cage, which ensures quiet operation and low weight. This cage design is rated for an operating temperature range of -30 to +120 degrees. The C3 radial bearing clearance indicates a slightly increased bearing clearance compared to the standard. This is recommended in the event of temperature differences between the inner and outer rings, or in the case of tight fits on the shaft and housing, to prevent the rollers from seizing during operation.