Cylindrical Roller Bearings FAG NUP218 -E-XL-TVP2

Cylindrical roller bearing NUP218 -E-XL-TVP2 with a 90 mm bore and an outer diameter of 160 mm: Single-row fixed bearing for high radial loads and axial guidance on both sides.

The NUP218 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager is designed to accommodate high radial loads in industrial drive systems. With a bore of 90 mm, an outside diameter of 160 mm and a width of 30 mm, it is suitable for standard installation spaces in mechanical engineering. This version features standard radial clearance and complies with tolerance class P0/PN or ABEC 1. As an open bearing, it can be flexibly integrated into existing lubrication systems.

When is the NUP218 -E-XL-TVP2 cylindrical roller bearing suitable as a fixed bearing?

The NUP design acts as a fixed bearing and guides the supported shaft in both axial directions. Two fixed flanges on the outer ring, as well as one fixed flange and one loose flange disc on the inner ring, enable the transmission of axial guiding forces in addition to the main radial load. This design is primarily used where shafts must be axially fixed at both ends whilst simultaneously accommodating high radial loads.

What are the operating characteristics of the TVP2 polyamide cage?

The suffix TVP2 denotes a polyamide cage that precisely guides the cylindrical rollers and maintains the correct spacing between them. The material reduces the component’s weight and promotes quiet, low-vibration operation. The bearing is designed for a temperature range of -30 to +120 degrees. As the outer ring has no groove and no lubrication bore, the lubricant is supplied directly via the surrounding housing structure.