Cylindrical Roller Bearings FAG NUP2319 -E-XL-TVP2

The FAG NUP2319 -E-XL-TVP2 cylindrical roller bearing, a single-row fixed bearing with a 95 mm bore and an outer diameter of 200 mm, offers a high radial load capacity.

The FAG NUP2319 -E-XL-TVP2 cylindrical roller bearing supports shafts with a 95 mm bore diameter and, as a fixed bearing, absorbs radial forces as well as axial forces limited on both sides. Thanks to its solid construction, with a width of 67 mm and an outer diameter of 200 mm, this single-row bearing transmits high radial loads via the line contact of the cylindrical rolling elements. Fitted with a polyamide cage and standard radial clearance, this open rolling bearing is suitable for demanding industrial applications. Design engineers and maintenance personnel specifically use this design for precise shaft guidance.

In which bearing arrangements does the bearing perform guidance functions?

In mechanical assemblies, the component is used where bearing locations must simultaneously absorb very high radial forces and where defined axial guidance of the shaft in both directions is required. Thanks to the cylindrical rollers with a wide contact surface, the roller bearing offers high radial stiffness. Maintenance engineers use this dimensionally accurate design for standardised assembly procedures during repairs or new constructions in mechanical engineering.

What are the distinctive features of the NUP design with a polyamide cage?

The NUP design is characterised by two fixed flanges on the outer ring, one fixed flange on the inner ring and a loose flange disc, enabling the bearing to accommodate axial guidance forces in both directions. The polyamide cage (TVP2) guides the rolling elements with low friction and ensures smooth running with a low weight. As this is an open bearing, you can select the appropriate lubricant and external housing seals according to the specific requirements of your system. The permissible temperature range is between -30 and +120 degrees.