Axial Deep Groove Ball B. FAG 53213

The FAG 53213 axial deep-groove ball bearing accommodates unidirectional axial forces and has dimensions of 65 × 100 × 28.7 mm.

The 53213 axial deep-groove ball bearing is a separable rolling bearing designed to accommodate axial forces from a single direction. Manufactured from standard rolling-bearing steel 100Cr6, this bearing accommodates shafts with a diameter of 65 mm, an outer diameter of 100 mm and a width of 28.7 mm. The sheet steel cage keeps the rolling elements in order within the operating range of -30 to +150 degrees. As axial deep-groove ball bearings must not be subjected to radial loads, combine the assembly with suitable radial bearings during operation.

What is the 53213 axial deep groove ball bearing suitable for?

This single-acting bearing supports machine components where axial forces act along the shaft axis. The assembly is used for the axial support of shafts in technical systems where no radial loads act on the bearing. The bearing meets the requirements of tolerance class P0/PN or ABEC 1 for standard applications in industry and trade. To ensure smooth running, the design requires a sufficient minimum load as well as proper lubrication throughout the entire operating cycle.

How does the angular adjustability work on the 53213 axial deep-groove ball bearing?

The housing flange of this design features a spherical outer surface. In conjunction with a separately available shim, the bearing compensates for misalignment or skew between the shaft and the housing. The scope of supply includes this axial deep-groove ball bearing without a shim. If the housing surface is exactly at right angles, fit the bearing directly. If angular compensation is required, add the appropriate counterpart for the housing side.