51417 -MP Axial Deep Groove Ball B. by FAG
51417 -MP Axial Deep Groove Ball B. by FAG

FAG

Axial Deep Groove Ball B. FAG 51417 -MP

Technical data
 
Inner diameter
85 mm
Outer diameter
180 mm
Width
72 mm
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Product range
Axial deep groove ball bearing
Operating direction
Single direction bearing
Angular adjustment
Non-angle adjustable
Weight
9,45 kg
Scale quantity Your discount Unit price
2 31,88 € 605,64 €
3 63,75 € 573,77 €
637,52 €
inkl. MwSt, zzgl. Versandkosten

15 ready to ship

Axial Deep Groove Ball B. FAG 51417 -MP
In Stock

Axial Deep Groove Ball B. FAG 51417 -MP

The FAG 51417 -MP axial deep-groove ball bearing, with dimensions of 85x180x72 mm, supports single-acting axial forces in industrial shaft bearings.

The FAG 51417 -MP axial deep groove ball bearing is made from standard rolling-element bearing steel (100Cr6) and is suitable for operating temperatures ranging from -30 to +150 degrees Celsius. The dimensions – a bore diameter of 85 mm, an outside diameter of 180 mm and an axial width of 72 mm – support high axial forces in one direction. Thanks to its manufacture to tolerance class P0/PN, which corresponds to ABEC 1, the component can be integrated into industrial designs in accordance with standards and with a precise fit.

In which bearing arrangements is the 51417 -MP axial deep-groove ball bearing used?

This single-sided thrust bearing supports purely axial forces along the shaft axis, whilst it is not designed to withstand radial loads. In the design, this bearing unit is therefore combined with separate radial bearings to absorb transverse and longitudinal forces separately. The axial forces are transmitted directly into the machine housing, making this design particularly suitable for shaft lines subject to purely axial compressive forces.

What are the distinctive features of the solid brass cage in the 51417 -MP?

The suffix ‘MP’ indicates that the unit is fitted with a solid brass cage, which reliably guides the rolling elements during rotational movement. Compared to sheet metal cages, brass offers increased dimensional stability and strength, making the cage resistant to mechanical loads. During installation, please note that the component is not angle-adjustable. As the unit is designed without shims, the mating surfaces on the housing and shaft must be precisely aligned at right angles to avoid impermissible edge loads.

What are the dimensions of the 51417-MP axial deep-groove ball bearing?

With a bore diameter of 85 mm for the shaft, an outer diameter of 180 mm for the housing bore and a height of 72 mm, the unit can accommodate axial loads. These dimensions make the design suitable for shaft bearings requiring a large installation space and subject to high unilateral axial forces.

What does the suffix ‘MP’ stand for at FAG?

At FAG, the abbreviation MP stands for a solid brass cage. This type of cage ensures stable guidance of the balls and, thanks to its strength, performs well even under demanding operating conditions compared with standard sheet metal cages.

Can the 51417-MP axial deep-groove ball bearing accommodate radial forces?

No, axial deep-groove ball bearings are designed solely to withstand axial loads in a single direction. If additional radial forces occur during operation, these must be absorbed by separate radial bearings on the shaft to ensure that no impermissible transverse loads act on the raceways.

What is the approved temperature range for this component?

Thanks to the materials used – standard 100Cr6 rolling bearing steel and a solid brass cage – the bearing is designed for temperatures ranging from -30 to +150 degrees. For practical applications, the thermal resistance of the selected lubricant must also be taken into account.

Can misalignments be compensated for with this bearing?

The bearing is not angle-adjustable and does not compensate for misalignment between the shaft and the housing. As washers are not included in the scope of supply, the contact surfaces on the housing and shaft must be machined at right angles to the bearing axis in order to avoid edge stresses.

What is the tolerance class of bearing 51417 -MP?

The roller bearing is manufactured to tolerance class P0/PN (equivalent to ABEC 1). This standard tolerance meets the standard requirements for dimensional and concentricity accuracy in industrial roller bearings and enables a precise fit during installation.

Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/

10013041
Product added to compare.
Product added to wishlist

Reset Password

New Account Register