FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 2,37 € | 45,00 € |
| 35 | 4,74 € | 42,63 € |
The FAG 51310 axial deep-groove ball bearing, with a 50 mm bore and an outer diameter of 95 mm, accommodates pure axial forces in one direction.
The 51310 axial deep-groove ball bearing is a separable rolling bearing designed to accommodate purely axial loads. As the shaft ring, housing ring and rolling element set are separate components, they can be fitted one after the other. FAG manufactures this axial bearing from standard rolling bearing steel 100Cr6 in tolerance class P0 or ABEC 1. With a height of 31 mm, the bearing guides rotating shafts in the axial direction and supports forces on one side.
This thrust bearing absorbs high compressive forces parallel to the shaft axis; however, due to its design, it is not suitable for radial loads. Typical areas of application include mechanical engineering applications with shafts subjected to purely axial loads. The integrated sheet steel cage guides the rolling elements at operating temperatures ranging from –30 to +150 degrees. If combined loads occur, the axial bearing must be supplemented with a separate radial bearing.
The flat housing flange of the 51310 requires contact surfaces machined exactly at right angles to the axis of rotation. As the design is not angle-adjustable, misalignment will result in uneven edge pressures. As per the scope of supply, the bearing is designed for installation without a separate shim and rests flat against the housing. Before commissioning, ensure that the shaft disc with the 50 mm bore fits snugly, whilst the housing disc rests freely in the axial direction.
The bearing has an internal diameter of 50 mm at the shaft flange and an external diameter of 95 mm at the housing flange. The total height when fitted is 31 mm. These standardised dimensions allow for dimensionally accurate replacement in existing assemblies.
No, this axial bearing is designed exclusively to accommodate forces in the axial direction. If radial loads are also acting on the shaft during operation, these must be supported by a separate radial bearing. A purely radial load would damage the rolling element set and the raceways.
The roller bearing is designed for operation between -30 and +150 degrees. The bearing shells, sheet steel cage and rolling elements made from 100Cr6 bearing steel retain their dimensional stability within this temperature range. The lubricant used must be selected to suit the actual operating temperature of the bearing location.
This version of the 513 series is not angle-adjustable. Both bearing washers have flat contact surfaces and do not tolerate any misalignment of the shaft relative to the housing. During installation, perpendicular stop surfaces are required to prevent uneven load distribution.
The raceways and balls are made from standard roller bearing steel of the 100Cr6 grade. This material offers high strength and dimensional stability under constant compressive load. The rolling elements are guided at regular intervals by a sheet steel cage.
The designation P0, also known as standard tolerance PN or ABEC 1, defines the accuracy of dimensional and running characteristics in accordance with applicable standards. This tolerance class covers the standard requirements for dimensional accuracy and concentricity in mechanical engineering.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/