SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 40,93 € | 777,65 € |
| 3 | 81,85 € | 736,73 € |
The SKF 52228 axial deep groove ball bearing is designed for shafts with a 120 mm bore and accommodates axial loads in both directions.
The 52228 axial deep-groove ball bearing is designed for applications in which purely axial forces act on the bearing in both directions. Manufactured from standard rolling-element bearing steel (100Cr6), this bearing offers high dimensional stability. The components are manufactured to standard tolerances (P0/PN or ABEC 1). A sheet steel cage guides the rolling elements evenly along their raceways and keeps friction to a minimum during operation.
This bearing is primarily used in general mechanical engineering where shafts need to be guided in both axial directions. As the bearing is designed to act on both sides, it withstands thrust forces from alternating directions. This thrust bearing must not be used to support radial loads; a separate radial bearing arrangement must be provided for this purpose. Thanks to the flat design of the housing discs, the bearing is suitable for rigid assemblies without misalignment.
The double-acting design consists of a central shaft disc, two housing discs and two separate ball rings with a sheet steel cage. When designing the mounting surfaces, it must be borne in mind that this rolling bearing is not angle-adjustable. Misalignment between the shaft and the housing leads to edge stresses, which is why the contact surfaces must be flat and at right angles. The permissible temperature range extends from -30 to +150 degrees and covers industrial applications with a suitable lubricant.
This double-acting axial bearing has a bore of 120 mm, an outer diameter of 200 mm and a total width of 81 mm. It is designed to absorb axial forces from two directions and provides axial support for shafts.
Axial deep-groove ball bearings are designed exclusively for axial loads. If radial forces occur during operation, these must be accommodated by separate radial bearings, such as deep-groove ball bearings or cylindrical roller bearings, in order to protect the axial bearing from overload and premature failure.
This model is not angle-adjustable and is supplied without shims. The contact surfaces in the housing and on the shaft must be exactly perpendicular to the axis of rotation. Misalignments cannot be compensated for with this design and will result in uneven loading of the raceways.
The bearing, made from standard 100Cr6 roller bearing steel and featuring a sheet steel cage, is designed for operating temperatures ranging from -30 to +150 degrees. The actual achievable limit also depends, in practice, on the temperature resistance of the selected grease or lubricating oil.
P0, or ABEC 1, refers to the standard tolerance for rolling bearings in accordance with international standards. It defines the permissible dimensional, geometric and running accuracies for standard applications in mechanical engineering where no higher precision class is required.
The roller bearing is fitted with a sheet steel cage. This is characterised by its low weight combined with high strength, and guides the balls between the bearing rings whilst maintaining its dimensional stability within a temperature range up to +150 degrees.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership