Axial Deep Groove Ball B. FAG 52312

The FAG 52312 axial deep-groove ball bearing supports axial forces in both directions and has the main dimensions 50 x 110 x 64 mm.

The 52312 axial deep-groove ball bearing is designed for the precise axial guidance of shafts in mechanical and plant engineering. As a double-acting rolling bearing, this design accommodates thrust forces from two opposite directions. Manufactured from hardened standard roller bearing steel 100Cr6, the raceways offer high compressive strength and dimensional stability. Thanks to its design to standard tolerances in accordance with P0/PN or ABEC 1, the component can be integrated precisely into standardised housings.

What loads does the double-acting bearing 52312 accommodate?

The bearing is primarily used in designs where shafts must be fixed purely axially when the load direction changes. The bearing accommodates axial forces only, whilst radial forces must be supported by separate radial bearings. The rolling elements run in a dimensionally stable sheet steel cage, which guides the balls even during rapid changes in rotational speed. As this model is designed for operating temperatures ranging from –30 to +150 degrees, it is suitable for a wide range of thermal operating conditions.

What does the double-acting design mean for installation?

A double-acting bearing consists of a central shaft disc, two housing discs and two separate sets of balls. The shaft disc is fixed to the shaft, whilst the housing discs are supported within the housing. Please note that this design is not angle-adjustable. Planar-parallel mounting shoulders and a precisely right-angled alignment to the axis of rotation are required to avoid edge stresses. The scope of supply includes the rolling bearing without additional shims.