Axial Deep Groove Ball B. SKF 51124

The SKF 51124 single-direction axial deep groove ball bearing, with dimensions of 120 × 155 × 25 mm, accommodates high axial loads in one direction.

The 51124 axial deep-groove ball bearing guides shafts in the axial direction and supports pure thrust loads. As a single-direction design, this model specifically absorbs thrust forces from one direction. SKF manufactures the components from hardened standard rolling-element bearing steel (100Cr6), ensuring that the raceways remain resistant to mechanical wear. The integrated sheet steel cage keeps the rolling elements in order and maintains a stable lubricating film. The bearing is primarily used in vertically or horizontally mounted shaft systems that have to withstand defined thrust forces.

Under what operating conditions does the 51124 axial deep groove ball bearing absorb axial forces?

This component is used when shaft guides need to support unilateral axial thrust forces in the absence of radial loading. Typical applications include axially loaded shaft lines with a clearly defined load direction. The bearing is not angularly adjustable, which is why the design requires precisely perpendicular contact surfaces on the shaft and housing. As it is designed to tolerance class P0 or ABEC 1, the unit is suitable for standardised fits in mechanical engineering.

What are the special features of the 51124 axial deep-groove ball bearing without a washer?

This version does not include a separate shim and features a flat housing flange. The mating surfaces in the housing must therefore be perfectly flat, as the component does not compensate for misalignment. The permissible temperature range is from –30 to +150 degrees Celsius, which allows for a wide range of applications. During assembly, the direction of action must be observed: the shaft disc with a 120 mm bore sits firmly on the shaft, whilst the housing disc with an outer diameter of 155 mm rests against the housing.