Axial Deep Groove Ball B. SKF 51213

The SKF 51213 axial deep-groove ball bearing accommodates unidirectional axial forces in mechanical engineering applications, with dimensions of 65x100x27 mm.

The SKF 51213 axial deep groove ball bearing is designed to specifically accommodate axial forces in one direction. With a bore of 65 mm, an outside diameter of 100 mm and a width of 27 mm, this rolling bearing guides rotating components in the axial direction. As it is manufactured from standard rolling-element bearing steel (100Cr6), the thrust bearing offers high dimensional stability. It is primarily used where shafts require axial support whilst no significant radial forces act on the bearing.

What is the 51213 axial deep groove ball bearing suitable for?

The 51213 axial deep-groove ball bearing is suitable for mechanical designs in which purely axial loads from a defined direction need to be supported. Typical applications include vertical shaft mountings and equipment subject to purely axial compressive loads. As this thrust bearing is not designed to accommodate radial forces, designers usually combine it with separate radial bearings. The design complies with the standard tolerance P0/PN or ABEC 1 and meets common industrial requirements.

What should be taken into account when mounting the single-acting design?

During assembly, the 51213 axial deep groove ball bearing requires careful alignment, as this bearing is not angularly adjustable. Planar, parallel contact surfaces on the housing and shaft prevent uneven force transmission to the rolling elements. Ensure the washers are correctly positioned: the shaft washer sits firmly on the shaft, whilst the housing washer is centred within the housing. The integrated sheet steel cage guides the balls within a temperature range of -30 to +150 degrees Celsius.