Angular Contact Ball B. FAG 7213 -B-XL-TVP-UO

The FAG 7213 -B-XL-TVP-UO single-row angular contact ball bearing, with a 65 mm bore and a 40-degree contact angle, accommodates combined loads without play when fitted as a bearing set.

The FAG 7213 -B-XL-TVP-UO angular contact ball bearing is an open, single-row rolling bearing made from standard bearing steel (100Cr6). The unit has a bore of 65 mm, an outer diameter of 120 mm and a width of 23 mm. Thanks to the diagonally opposed raceways, the design is particularly suitable for accommodating combined loads consisting of radial and axial forces. Fitted with a lightweight polyamide cage, the bearing operates with low vibration within a temperature range of -20 to +120 degrees.

What are the industrial applications for the 7213 -B-XL-TVP-UO angular contact ball bearing?

Designs subject to unidirectional axial forces and simultaneous radial loads constitute the primary area of application for this angular contact ball bearing. Thanks to its contact angle of 40 degrees, the component can accommodate high axial forces in one direction. Typical applications include shaft mountings where shafts must be guided with precision. As this is an open bearing, the housing design must ensure a supply of lubricant and protection against contamination.

What are the advantages of the UO designation when pairing bearings?

The UO designation identifies this component as a universal bearing for installation in pairs. When fitted in an O or X arrangement, the bearing set self-aligns immediately without any play, without the need to calibrate shims. The integrated polyamide cage reduces rotating mass and ensures quiet operation within the standard tolerance class P0/PN (ABEC 1). Design engineers must bear in mind that the operating temperature is limited to between -20 and +120 degrees due to the material of the cage.