Angular Contact Ball B. FAG 7218 -B-XL-TVP-UA

The FAG 7218 -B-XL-TVP-UA angular contact ball bearing, with a 90 mm bore and a 40-degree contact angle, accommodates combined radial and axial loads.

The 7218 -B-XL-TVP-UA angular contact ball bearing is a single-row rolling bearing made from standard bearing steel (100Cr6) with dimensions of 90 x 160 x 30 mm. The design features a contact angle of 40 degrees and transmits axial forces specifically in one direction. As an open bearing, this model operates without integrated sealing washers in oil- or grease-lubricated systems. A guided polyamide cage keeps the rolling elements spaced apart and ensures smooth running within a temperature range of -20 to +120 degrees Celsius.

What loads can the 7218 -B-XL-TVP-UA angular contact ball bearing accommodate?

The design is suitable for bearing locations where high radial forces are combined with axial forces acting from one side. Typical applications include rotating shafts that, in addition to radial loads, also accommodate defined axial guiding forces. The model is designed for installation in pairs. When mounted in an O or X arrangement, the bearing set has minimal axial play. This enables the creation of shaft guides that precisely support varying axial loads whilst simultaneously providing radial support.

What role do the contact angle and cage design play in this bearing?

The contact angle of 40 degrees gives the bearing a high axial load-carrying capacity in one load direction. A second, oppositely mounted bearing is required to accommodate forces on both sides. The UA designation indicates universal suitability for installation in sets. With its lightweight polyamide cage, the assembly is suitable for operating temperatures ranging from –20 to +120 degrees Celsius. Before installation, the external seal of the bearing housing must be checked, as the open design requires protection against foreign particles entering the housing.