Angular Contact Ball B. FAG 7206 -B-MP-UA

The FAG 7206 -B-MP-UA angular contact ball bearing, measuring 30 × 62 × 16 mm, accommodates combined loads at high speeds via a 40-degree contact angle.

The 7206 -B-MP-UA angular contact ball bearing is a single-row rolling bearing made from standard rolling bearing steel (100Cr6) by FAG Rolling Bearings. The design features a bore of 30 mm, an outer diameter of 62 mm and a width of 16 mm. Due to the angular arrangement of the raceways, this roller bearing transmits simultaneously acting radial and axial forces. This open component, which has no integrated seal, operates in a clean lubrication environment with normal radial bearing clearance.

What is the 7206 -B-MP-UA angular contact ball bearing suitable for in operation?

This single-row bearing supports shafts under combined loads and specifically absorbs axial forces in one direction. Typical applications are found in industrial bearing arrangements with predominantly one-sided axial loads. The open design allows for a continuous flow of lubricant and covers a temperature range from -20 to +150 degrees. As a single bearing can only absorb axial forces from one side, the design often combines two bearings in opposition.

What do the brass cage and the suffix ‘UA’ mean?

The brass cage (MP) maintains the balls’ dimensional stability even under severe vibrations or thermal stress. The suffix B denotes the increased 40-degree contact angle, which improves axial load-carrying capacity whilst providing greater rigidity. The abbreviation UA indicates a universal design for installation in sets. When two bearings are mounted in pairs in an X or O configuration, the bearing set is manufactured with a defined, low axial clearance.