Angular Contact Ball B. FAG 7307 -B-XL-TVP

The FAG 7307 -B-XL-TVP single-row angular contact ball bearing, with a 35 mm bore and a 40-degree contact angle, can accommodate high unilateral axial and radial forces.

This single-row angular contact ball bearing 7307 -B-XL-TVP from FAG Rolling Bearings is made from standard rolling bearing steel (100Cr6) and features an open design without integrated seals. Thanks to the standard radial clearance and the standard tolerance according to P0/PN, the component can be mounted in standardised shaft and housing fits. The integrated polyamide cage guides the rolling elements and contributes to the low weight of the rotating components during operation.

What is the 7307 -B-XL-TVP angular contact ball bearing suitable for?

Design engineers opt for this design when bearing arrangements need to support both radial forces and significant axial forces in one direction simultaneously. Thanks to the raceways, which are offset at an angle to one another, the bearing effectively dissipates axial loads via the rolling element ring. As single-row angular contact ball bearings, by their design, can only accommodate axial forces from one side, they are usually fitted in pairs, with one bearing positioned opposite the other. Typical applications include bearing arrangements subject to combined loads and single-sided axial guidance.

What are the advantages of the 40-degree contact angle and the polyamide cage?

The designation letter ‘B’ indicates a contact angle of 40 degrees, which specifically increases the axial load capacity compared with versions featuring a smaller angle. The TVP solid cage made of polyamide is characterised by its elastic properties and low-noise rolling element guidance. As this roller bearing is of an open design, the bearing location requires an external lubricant as well as a housing seal concept to keep out contaminants. The material combination is designed for a temperature range of -20 to +120 degrees.