Angular Contact Ball B. FAG 7306 -B-XL-TVP

The 7306 -B-XL-TVP angular contact ball bearing from FAG Wälzlager combines dimensions of 30 × 72 × 19 mm with a high axial load capacity thanks to a 40-degree contact angle.

The 7306 -B-XL-TVP angular contact ball bearing from FAG Wälzlager is a single-row radial ball bearing made from standard bearing steel (100Cr6) for demanding applications. With a bore of 30 mm, an outer diameter of 72 mm and a width of 19 mm, this design accommodates radial forces and single-sided axial forces. As this is an open bearing without integrated seals, lubricating oil or grease can reach the raceways directly and circulate freely.

For which load conditions is the 7306 -B-XL-TVP angular contact ball bearing suitable?

This single-row angular contact ball bearing is primarily used for combined loads consisting of radial forces and one-way axial loads. If two bearings are mounted in pairs facing each other, reliable two-way axial guidance of the shaft can also be achieved. The open design, which does not incorporate abiding sealing elements, is particularly well-suited to bearing arrangements in enclosed housings with external sealing and controlled relubrication.

What are the key features of the polyamide cage and contact angle?

The 40-degree contact angle enables the targeted absorption of high axial forces in one load direction. The integrated polyamide cage (TVP) guides the rolling elements with low friction and is suitable for operating temperatures ranging from –20 to +120 degrees Celsius. The design complies with tolerance class P0 (ABEC 1) and has standard radial bearing clearance, with the final operating clearance only being determined during assembly by adjustment.