Angular Contact Ball B. FAG 7302 -B-XL-TVP-UA

The 7302 -B-XL-TVP-UA angular contact ball bearing, measuring 15 × 42 × 13 mm, accommodates radial and single-direction axial loads in mechanical engineering applications.

The single-row angular contact ball bearing 7302 -B-XL-TVP-UA from FAG Rolling Bearings is designed for demanding bearing arrangements subject to combined loads. With a bore of 15 mm, an outside diameter of 42 mm and a width of 13 mm, this open roller bearing has a 40-degree contact angle. Manufactured from standard 100Cr6 rolling-bearing steel, the lightweight polyamide cage guides the balls quietly. The component is suitable for operating temperatures ranging from –20 to +120 degrees Celsius.

What is the 7302 -B-XL-TVP-UA angular contact ball bearing suitable for?

This single-row angular contact ball bearing is particularly suitable for shaft mountings where, in addition to radial forces, significant axial forces act in one direction. Thanks to the steep 40-degree contact angle, the bearing specifically supports axial loads. Typical applications are found in general mechanical engineering for shaft guides subjected to combined loads. As this is an open bearing without an integrated seal, it can be flexibly lubricated with lubricating oil or grease via an external lubrication system.

What does the suffix ‘UA’ mean for the 7302 angular contact ball bearing?

The abbreviation UA denotes a universal design for installation in pairs. When fitted as a pair of bearings in an O or X arrangement, the design features low axial clearance, which facilitates the alignment of the two bearings within the housing. In addition to the universal pairing, you should take the ambient conditions into account: the polyamide cage is designed for temperatures ranging from -20 to +120 degrees. With tolerance class P0 or ABEC 1, the bearing complies with the usual standards for standardised precision requirements.