Angular Contact Ball B. FAG 7222 -B-XL-TVP-UO

The FAG 7222 -B-XL-TVP-UO angular contact ball bearing handles combined loads without play in a paired O or X arrangement, with dimensions of 110 × 200 × 38 mm.

The FAG 7222 -B-XL-TVP-UO angular contact ball bearing accommodates radial forces as well as single-sided axial forces. Thanks to its raceways, which are offset at an angle to one another, this rolling bearing effectively dissipates the forces at a contact angle of 40 degrees. The polyamide cage ensures smooth running of the ball row. As this is an open design without integrated seals, you can integrate the bearing directly into your design’s lubrication system.

What is the 7222 -B-XL-TVP-UO angular contact ball bearing suitable for?

Designs subject to simultaneous radial and axial forces represent the primary application for this angular contact ball bearing. Typical applications include shaft mountings with combined loads that require defined axial guidance. As a single angular contact ball bearing can only accommodate axial forces in one direction, it is often fitted in pairs with a second bearing mounted in the opposite direction. In this way, you can guide shafts in both directions and absorb alternating loads.

What distinguishes the UO design and the contact angle?

The suffix ‘UO’ denotes a universal design for installation in pairs. When fitted in an O or X arrangement, this results in a backlash-free mounting without the need for shims or complex adjustment procedures. The nominal contact angle of 40 degrees gives the component a high axial load-carrying capacity. When designing the application, please note the permissible operating temperature range of -20 to +120 degrees and ensure that suitable lubricants for open rolling bearings are used.