Angular Contact Ball B. FAG 7219 -B-MP

The FAG 7219 -B-MP angular contact ball bearing, with a 95 mm bore and a 40-degree contact angle, can accommodate high axial and radial forces on one side.

The FAG 7219 -B-MP angular contact ball bearing is a single-row rolling bearing made from standard bearing steel (100Cr6) with main dimensions of 95 x 170 x 32 mm. This design is characterised by a contact angle of 40 degrees and a robust brass cage. As an open bearing, it operates within a temperature range of -20 to +150 degrees Celsius. It is manufactured to tolerance class P0/PN or ABEC 1 with standard radial clearance.

In which applications is the 7219 -B-MP angular contact ball bearing used?

Single-row angular contact ball bearings of this design are suitable for bearing arrangements where combined loads with a predominant axial component act in one direction. Thanks to the 40-degree contact angle, the component effectively transfers axial forces from one raceway to the other. Typical applications are found in mechanical engineering and fixture manufacturing, where precise shaft guidance is required. As it can only be axially loaded on one side, designers usually pair the bearing with a second rolling bearing.

What are the advantages of the brass cage and the open design?

The integrated brass cage guides the rolling elements precisely and withstands demanding thermal and mechanical stresses up to +150 degrees Celsius. As the bearing has an open design, the lubricant reaches the raceways unimpeded, allowing direct integration into existing oil or grease circulation systems. Designers must protect the bearing location on site against dirt and moisture. The standard radial bearing clearance provides a balanced operating clearance for many industrial applications.