Angular Contact Ball B. FAG 7210 -B-XL-TVP-UO

The FAG 7210 -B-XL-TVP-UO angular contact ball bearing (50x90x20 mm) accommodates combined loads and can be paired in an O or X arrangement without any play.

The single-row angular contact ball bearing 7210 -B-XL-TVP-UO from FAG accommodates both radial and axial forces in one direction simultaneously. With a contact angle of 40 degrees, this rolling bearing is specifically suited to axial loads in mechanical engineering. Manufactured from standard roller bearing steel 100Cr6 with key dimensions of a 50 mm bore, 90 mm outer diameter and 20 mm width, this version complies with tolerance class P0/PN or ABEC 1. It has a standard radial clearance and operates within a temperature range of –20 to +120 degrees Celsius.

Under what load conditions is the 7210 -B-XL-TVP-UO angular contact ball bearing used?

This single-row angular contact ball bearing is primarily used where rotating shafts must withstand not only radial forces but also unidirectional axial loads. As the bearing pair is designed to be play-free in O and X arrangements, two of these bearings are suitable for offset mountings. In this way, forces acting on both sides can be accommodated, whilst the polyamide cage serves to guide the rolling elements.

What does the designation ‘UO’ mean for this FAG angular contact ball bearing?

The suffixes define the exact specifications for bearing installation. The abbreviation ‘UO’ denotes a universal bearing which, when fitted in pairs in an O or X arrangement, is play-free. This simplifies installation, as there is no need to adjust the bearing clearance. The designation ‘B’ stands for a contact angle of 40 degrees, whilst ‘TVP’ describes the polyamide cage. As an open design without sealing washers, the bearing requires external sealing of the bearing housing and a lubricant supply.