Angular Contact Ball B. FAG 7210 -B-XL-TVP-UA

The FAG 7210 -B-XL-TVP-UA angular contact ball bearing (50x90x20 mm) can accommodate high radial loads as well as unilateral axial loads at a contact angle of 40 degrees.

The single-row angular contact ball bearing 7210 -B-XL-TVP-UA is designed as an open rolling bearing for combined force transmission. Thanks to raceways in the inner and outer rings that are offset at an angle to one another, this bearing supports radial forces as well as axial forces in one direction. Manufactured from standard roller bearing steel (100Cr6) with standard radial clearance and tolerance class P0/PN or ABEC 1, the component provides a solid foundation for demanding rotational movements in industrial assemblies.

What is the 7210 -B-XL-TVP-UA angular contact ball bearing suitable for in operation?

It is primarily used in shaft mountings where axial forces occur alongside radial forces. As a single single-row angular contact ball bearing can only accommodate axial loads in one direction, a second, oppositely mounted bearing is usually used as a counter-bearing in such assemblies. The contact angle of 40 degrees specifically facilitates the absorption of axial loads and enables stable guidance of rotating machine components.

What does the ‘universal’ designation UA mean in relation to pairing?

The suffix ‘UA’ designates the component as universally adjustable for installation in sets. When mounted in pairs directly adjacent to one another in an O or X arrangement, a defined, small amount of axial clearance is established within the bearing pair without the need for shims. This simplifies assembly and reduces the effort required for manual alignment. The polyamide cage (TVP) promotes low-vibration operation and is suitable for operating temperatures ranging from -20 to +120 degrees.