Angular Contact Ball B. FAG 7210 -B-XL-TVP

The FAG 7210 -B-XL-TVP angular contact ball bearing (50x90x20 mm) accommodates radial loads as well as high axial loads on one side and features a lightweight polyamide cage.

The 7210 -B-XL-TVP angular contact ball bearing is a single-row rolling bearing from FAG with a bore of 50 mm, an outside diameter of 90 mm and a width of 20 mm. Thanks to the specific arrangement of the raceways, this design can simultaneously accommodate radial forces and axial forces acting on one side. Manufactured from standard roller bearing steel 100Cr6 and featuring standard radial clearance, this open bearing is suitable for demanding applications in general mechanical engineering. When you purchase this rolling bearing, you receive an industry-proven solution in tolerance class P0/PN (ABEC 1).

In which applications is the 7210 -B-XL-TVP angular contact ball bearing used?

The 7210 -B-XL-TVP angular contact ball bearing is primarily used where shaft bearings must accommodate not only transverse forces but also axial forces in one direction. Thanks to its 40-degree contact angle, this single-row bearing can withstand high axial loads. Its use is recommended for combined loads with a defined direction of force. As it is an open design, the bearing can be supplied with oil or grease directly via the lubrication system of the overall plant.

What role do the 40-degree contact angle and the TVP cage play?

The designation ‘B’ refers to the 40-degree contact angle. This angle facilitates the absorption of axial loads; however, it requires a suitable counter-guide when force directions vary. The TVP cage, made of polyamide, is characterised by its low weight and elastic properties, which reduce noise during operation. The bearing is designed for operating temperatures ranging from -20 to +120 degrees. When designing the application, please note that open angular contact ball bearings must be protected against contamination from the environment.