Angular Contact Ball B. SKF 7207 BECBP

The SKF 7207 BECBP angular contact ball bearing, with a 35 mm bore and a 40-degree contact angle, provides precise guidance for combined radial and axial loads.

As a single-row ball bearing, the 7207 BECBP accommodates high radial forces and single-direction axial forces simultaneously. Thanks to the SKF Explorer design and the 100Cr6 material, the bearing performs reliably in demanding continuous operation. The open design allows for flexible lubricant selection directly within the housing. Thanks to dimensional accuracy to tolerance class P6 and enhanced running accuracy P5, the unit operates with low vibration even at high speeds.

In which configurations does the 7207 BECBP angular contact ball bearing support loads?

Typical applications include bearing arrangements subject to combined loads, where axial forces in one direction are carried alongside radial forces. As a single-row angular contact ball bearing can, by design, only accommodate axial forces from one side, it is frequently fitted in pairs against a second bearing in mechanical engineering applications. The design is universally adaptable: when mounted in an O or X arrangement, a specific amount of axial clearance is established within the bearing pair. This simplifies alignment during shaft mounting.

What advantages do the 40-degree contact angle and the polyamide cage offer?

The nominal contact angle of 40 degrees gives the unit a high axial load-carrying capacity for its dimensions of 35x72x17 mm. The rolling elements and raceways transmit the forces at an angle to the radial plane. The integrated polyamide cage guides the balls with low friction and ensures a low weight. An operating temperature range of –20 to +120 degrees is permitted. As no integrated sealing washers are fitted, you should protect the bearing location from foreign particles via the housing.