FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 8,74 € | 165,97 € |
| 5 | 17,48 € | 157,23 € |
The FAG 3312 -B-TVH double-row angular contact ball bearing accommodates high radial loads as well as axial forces on both sides, whilst maintaining compact dimensions of 60 × 130 × 54 mm.
The 3312 -B-TVH angular contact ball bearing is a double-row rolling bearing made from standard bearing steel (100Cr6) with a 60 mm bore, 130 mm outer diameter and 54 mm width. Thanks to its double-row design, this bearing simultaneously supports radial forces and axial loads acting in both directions. FAG manufactures this model as an open bearing without an integrated seal. A guided polyamide cage keeps the rolling elements spaced apart and ensures low-vibration operation within a temperature range of -20 to +120 degrees Celsius.
This double-row angular contact ball bearing is primarily used in applications where structures must absorb tilting moments and combined loads within a limited axial installation space. Thanks to its contact angle of 40 degrees, the bearing dissipates axial forces in both directions. It is suitable for bearing arrangements with axial fixation on both sides.
As this is an open bearing, the raceways are lubricated via the lubricant supply from the surrounding housing structure.
The designation TVH indicates a polyamide cage, which contributes to quiet running thanks to its low weight. When designing the system, take into account the permissible operating temperatures between –20 and +120 degrees. Standard radial bearing clearance provides a suitable basis for common fits in mechanical engineering where there are no extreme temperature differences.
As the 3312 -B-TVH angular contact ball bearing does not have its own sealing washers, protect the bearing housing from contamination using external housing seals.
The bearing has an inside diameter of 60 mm, an outside diameter of 130 mm and a width of 54 mm. The outer ring is cylindrical in design and has neither flanges nor grooves. These dimensions allow for a precise fit when installed in housings and on shafts with the appropriate fit selected.
At FAG, the abbreviation TVH stands for a polyamide cage. This material is characterised by favourable sliding properties and low density, which reduces inertial forces during operation. The cage guides the rolling elements in the raceways and is designed for operating temperatures ranging from -20 to +120 degrees.
The contact angle describes the inclination of the line of contact between the ball and the raceway relative to the radial plane. An angle of 40 degrees allows high axial forces to be accommodated. In a double-row design, the roller bearing supports axial loads in both directions and provides rigid guidance for rotating machine components.
This model does not have any integrated cover plates or sealing washers. Lubricant is supplied via the machine’s housing system, either with oil or grease. To prevent the ingress of dirt and lubricant loss, seal the bearing housing using external components such as shaft seals or labyrinth seals.
The angular contact ball bearing complies with tolerance class P0 (standard tolerance, comparable to ABEC 1). This manufacturing precision meets the requirements of general mechanical and plant engineering. It enables cost-effective use of the bearing whilst ensuring dimensional accuracy and concentricity of the functional surfaces in accordance with the relevant standards.
The standard radial bearing clearance refers to the internal clearance between the rolling elements and raceways in their initial state. It is designed to suit standard shaft and housing fits. After press-fitting, a defined operating clearance remains, which enables low-friction rotation at normal operating temperatures.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/