Angular Contact Ball B. FAG 7214 -B-XL-TVP-P5-UO

The FAG 7214 -B-XL-TVP-P5-UO single-row angular contact ball bearing offers high positioning accuracy with a 70 mm bore, 125 mm outer diameter and 24 mm width.

The 7214 -B-XL-TVP-P5-UO angular contact ball bearing is an open, single-row radial rolling bearing made from standard bearing steel (100Cr6) for demanding industrial applications. Thanks to its contact angle of 40 degrees, this component can accommodate combined loads consisting of radial forces and single-sided axial forces. FAG manufactures this model with a lightweight polyamide cage and designs it for a temperature range of -20 to +120 degrees. This design is suitable for precise shaft support in mechanical engineering.

What is the 7214 -B-XL-TVP-P5-UO angular contact ball bearing suitable for?

This bearing type is primarily used where rotating shafts must accommodate not only radial forces but also defined axial forces in one direction. Due to its higher tolerance class P5 or ABEC 5, the bearing is recommended for precision shaft mountings with high requirements for concentricity and rigidity. As this is an open bearing without an integrated seal, you should integrate it directly into your design’s lubrication system.

What do the P5 tolerance class and the UO designation mean?

Tolerance class P5 denotes tighter dimensional and running tolerances than the standard specification, which improves concentricity at higher speeds. The suffix UO indicates that, when mounted in pairs in an O or X arrangement, the bearing pair is adjusted to be free of play. This simplifies the assembly of bearing sets, as no manual adjustment of the axial clearance is required. When designing the assembly, ensure that the reaction force is supported by a second bearing.